My Board

CPU-Z is a freeware that gathers information on some of the main devices of your system.

CPU

• Name and number.
• Core stepping and process.
• Package.
• Core voltage.
• Internal and external clocks, clock multiplier.
• Supported instructions sets.
• Cache information.

Mainboard

• Vendor, model and revision.
• BIOS model and date.
• Chipset (northbridge and southbridge) and sensor.
• Graphic interface.

Memory

• Frequency and timings.
• Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.

System

• Windows and DirectX version.

[quote name=\'CPU-Z Readme File\']CPU-Z Readme file
------------------

Version 1.41
September 2007
Contact : cpuz@cpuid.com
Web page: [url=\"http://www.cpuid.com/cpuz.php\"]http://www.cpuid.com/cpuz.php[/url]
Validation page : [url=\"http://valid.x86-secret.com/\"]http://valid.x86-secret.com/[/url]
Forum : [url=\"http://forum.x86-secret.com/forumdisplay.php?f=16\"]http://forum.x86-secret.com/forumdisplay.php?f=16[/url]
CPUID SDK : [url=\"http://www.cpuid-pro.com/devkits.php\"]http://www.cpuid-pro.com/devkits.php[/url]

CPU-Z is a freeware and can be freely distributed.

Configuration file (cpuz.ini)
------------------------------

The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :

[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=ON
MaxPCIBus=256
DMI=ON
Sensor=ON
SMBus=ON

- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF disables sensor chip detection and voltages measurement.
- PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision.
- SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information.

Parameters
----------

-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.

-html=filename : Same as "-txt" except it generates the html report.

-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).

Keys
----

F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory

Cache Latency Tool
------------------

The cache latency tool is now a stand-alone program that is included in the CPU-Z package.[/quote]Supported Hardware

• Processors
  Intel® Pentium™, Pentium™ MMX, Pentium™ Pro, Pentium™ II, Pentium™ !!!, Pentium™ !!!-M, Pentium™ 4, Pentium™ 4-M, Pentium™ M, Pentium™ D, Pentium™ XE, Pentium™ Dual Core, Core™ Solo, Core™ Duo, Core™ 2 Duo, Core™ 2 Quad, Core™ 2 Extreme, Celeron™ (P2/P3/P4/PM/CL) and Xeon™ (P2/P3/P4/C2D/C2Q) ;
  Itanium™, Itanium™ 2 ;
  
  AMD® Am5x86, K5™, Geode LX, K6™, K6™-2, K6™-III, K6™-2+, K6™-III+, Athlon™ (4, XP, MP), Duron™, Sempron™ (K7/K8), Athlon™ 64, Athlon™ 64 X2, Turion™, Opteron™, Athlon™ FX, Phenom™ ;
  
  VIA® C3™ (Samuel, Samuel2, Ezra, Ezra-T, Nehemiah), C7™, C7™-M ;
  
  Transmeta® Crusoë™ TM3200, TM5400, TM5500, TM5600, TM5800 ;
• Chipsets
  Intel® i430TX, i440LX, i440FX, i440BX/ZX, i810/E, i815/E/EP/EM, i840, i845, i845E, i845G, i850/E, i845PE/GE, E7205, E7500, E7520, i852, i855, i865P/PE/G, i875P, i915P/G, i915PM/GM, i925X/XE, i945P/PL/G/GZ, i945PM/GM/GT, i955X/XE, P965, Q965, G965, GL960/GM965/PM965, i975X, P35, G33, G31, Q35, Q33, X38 ;
  
  VIA® Apollo VP3, Apollo Pro, Apollo Pro +, Apollo Pro 266, KX133, KT133(A), KT266(A), KT400(A), KT600, P4X266(A), PT880, PT880 Pro, K8T800, K8T890, K8T900, P4M800CE, P4M890, P4M900, CX700/VX700 ;
  
  NVIDIA® nForce, nForce2, nForce3, nForce4, nForce4 SLI Intel Edition, GeForce 6100/6150 (nForce 410/430), nForce 520/550/560/570/590, 650i, 680i, MCP73 ;
  
  ATi® RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 ;
  
  SiS® 645, 645DX, 648, 648FX, 649, 655FX, 655TX, 656, 662, 735, 756, 761GX, 760, 760GX, 755, 755FX, 741, 741GX, 671/FX/DX/MX ;
  
  AMD® AM-751, AM-761, AM-762 (760MP) ;
• Memory
  SDR, DDR, DDR2, FB-DDR2, DDR3, RDRAM (Rambus®) ;
  EPP and XMP extended profiles ;

*EDIT* Attachment removed due to updates. Please see further down in the thread for the new file.

This is a nifty little program ^.^

Version 1.51 is now out. See the changelog below:

[b]Version[/b] [b]Date[/b] [b]News and corrections[/b] 4/28/2009 [*]New version with installer (setup). [*]NVIDIA ION platform. [*]Intel \"Clarkdale\" processor preliminary support. [/list] 1.50 2/14/2009 [*]Improved support for AMD Phenom II processor. [*]New Intel Core i7 models. [*]Support for NVIDIA 740i chipset. [*]Several bug fixes. [/list] 1.49 12/4/2008 [*]AMD Phenom II processor. [*]New Intel Core 2 models. [*]Improved loading time. [*]New online validation process. [*]New [b]Hall of Fame[/b]. [/list] 1.48 10/15/2008 [*]Improved support for Intel Core i7 (Bloomfield & Gainestown). [*]Intel Atom dual-core version support. [*]AMD Athlon \"Kuma\" processor support. [*]Alternate clock computation method based on \"duty cycles\" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini) [/list] 1.47 08/27/2008 [*]Intel Core i7 processor. [*]Intel Core 2 Duo S Mobile processors. [*]NVIDIA MCP79/7A chipset. [*]AMD 790GX / SB750 chipset. [/list] 1.46 06/27/2008 [*]AMD Puma platform (Turion & Turion Ultra \"Griffin\"). [*]AMD Black Edition processors. [*]Intel Xeon EX \"Dunnington\". [/list] 1.45 05/10/2008 [*]Intel Atom Z500/Z510/Z520/Z530/Z540 processors. [*]Intel Core 2 Duo E7x00 processor. [*]AMD 45 nm Phenom (Dened & Shanghai) processors. [*]Intel P45 chipset. [/list] 1.44.2 03/29/2008 [*]NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2). [*]Intel G35 chipset (1.44.2). [*]Updated support for VIA chipsets (1.44.2). [*]Support for the new validator (1.44.1). [*] Preliminary support for VIA Isaiah processor. [*] Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. [*] Memory timings on Intel 5400A/B MCH (Skulltrail). [*] Fix AMD Phenom detection issue on Windows Vista 64. [/list] 1.43 01/06/2008 [*] Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). [*] Intel X48 chipset detection. [*] AMD Athlon 64-LE 1600 and 1620 support. [*] Fix detection issues on unlocked Phenom (ES/BE). [/list] 1.42 11/23/2007 [*] Intel Wolfdale/Yorkfield/Penryn CPUs support. [*] AMD Phenom and Opteron Barcelona support improved. [*] Current core selection menu (right click on the CPU page). [*] Loading progress. [/list] 1.41 09/04/2007 [*] New CPU voltage monitoring. [*] Intel Xeon Tigerton support. [*] Intel IA64 CPUs support (Itanium / Itanium2). [b] Special thanks to Rami Radi and Ray Hinchliffe for their help.[/b] [*] AMD K10 Phenom preliminary support. [*] NVIDIA MCP73 support. [*] Intel XMP profiles support. [*] Memory modules nominal voltage. [/list] 1.40.5 07/06/2007 [*] NVIDIA nForce 560 chipset support (1.40.5) [*] Intel Dynamic FSB technology support (1.40.5) [*] Athlon 64 X2 BE & Sempron LE (TDP 45W) (1.40.5) [*] SiS671/FX/DX/MX northbridge support (1.40.5) [*] SiS968 southbridge support (1.40.5) [*] VIA P4M800CE chipset support. [*] Preliminary support for Intel Penryn CPUs family (45 nm). [*] Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. [*] Intel P35, G33, G31, Q35, Q33, X38 chipsets support. [*] Intel GL960/GM965/PM965 chipsets support. [*] AMD Athlon 64 \"Lima\" processor support. [*] AMD Geode LX processor support. [*] NVIDIA nForce 520 chipset support. [*] New parameter \"-console\" to generate output in a command prompt (Windows XP only). [*] New icon, courtesy of Techlogica. [/list]